Deco Shield DECO SHIELD is a 100% solids, USDA acceptable, clear epoxy flooring resin designed for color quartz floors and as a sealer for concrete. It will not blush or water spot and will bond to cold, damp surfaces. DECO SHIELD supports heavy industrial traffic, is resistant to fungus and mildew as well as being anti-microbial.

Deco Shield LV
DECO SHIELD LV is a 100% solids, low viscosity, clear epoxy flooring system designed for a variety of applications. It will not blush or water spot and has good physical and chemical resistance properties.

Glaze Shield HP
GLAZE SHIELD HP is a 100% solids, low viscosity, clear epoxy/acrylic coating for concrete and wood surfaces. It provides very good leveling and air release properties along with excellent chemical, temperature and abrasion resistance.

Industrial Floor Finish
INDUSTRIAL FLOOR FINISH is a 100% solids, USDA acceptable, epoxy flooring resin designed as a stand alone top coat and as a binder for non-skid surfaces. Non-blushing and non-water spotting. INDUSTRIAL FLOOR FINISH bonds to cold damp surfaces. High gloss, self leveling and color stable.

Orange Peel Floor Finish
ORANGE PEEL FLOOR FINISH is a 100% solids, high viscosity, modified novolac resin, designed as a finish textured top coat.. ORANGE PEEL FLOOR FINISH when finished with a textured roller will provide a heavy duty orange peel effect. Self-priming, and will bond to cold damp concrete. Non-Blushing and Non-water spotting characteristics makes it ideal for applications requiring high gloss appearance.

Chem Shield Resin
CHEM SHIELD RESIN is a 100% solids, Modified novolac system designed for broadcast floors and is suitable as a binder for mortars. CHEM SHIELD RESIN will bond to cold damp concrete. Non-Blushing and Non-water spotting characteristics makes it ideal for applications requiring high gloss appearance.

Chem Shield LV
CHEM SHIELD LV RESIN is a 100% solids, low viscosity Modified novolac resin designed as a binder for trowel applied floors. CHEM SHIELD LV RESIN will bond to cold damp concrete. Non-Blushing and Non-water spotting characteristics makes it ideal for applications requiring high strength, exceptional chemical resistance and moderate temperature resistance.

Nova Shield
NOVA SHIELD is a 100% solids, USDA acceptable, highly chemical and temperature resistant novolac coating that is suitable as a broadcast floor coating and can be used as an roll on top or wall liner. NOVA SHIELD provides a tough, chemical and abrasion resistant surface for concrete and wood surfaces.

Nova Shield LV
NOVA SHIELD LV is a 100% solids, USDA acceptable, highly chemical resistant, low viscosity novolac resin designed as a binder for novolac mortar. NOVA SHIELD LV provides a tough, chemical and abrasion resistant surface for concrete and wood substrates

Nova Shield Top Coat
NOVA SHIELD TOP COAT is a 100% solids, Novolac system designed for top coating broadcast floors and mortars, Additionally, it can be used as a broadcast floor coating and binder for epoxy mortars. NOVA SHIELD TOP COAT will bond to damp concrete. Non-Blushing and Non-water spotting characteristics makes it ideal for applications requiring an high gloss appearance.

Nova Shield HT
NOVA SHIELD HT is a 100% solids, highly chemical and temperature resistant novolac coating that is suitable as a broadcast floor coating. NOVA SHIELD HT Provides a tough, chemical and abrasion resistant surface for concrete and wood substrates

Epolastic
Epolastic is a 100% reactive epoxy/urethane modified resin, designed for bridging cracks in concrete with an exceptionally fast cure rate. All Eastern Resins Epoxy Top Coats will bond to the Epolastic membrane.

Fast Set Gel
FAST SET GEL is a 100% solids, USDA acceptable, fast setting epoxy gel, for leveling uneven floors. This system will not blush and provides an excellent bond to most epoxy top-coats.

Slow Set Gel
SLOW SET GEL is a 100% solids, USDA acceptable, adhesive epoxy gel, for leveling uneven concrete floors and sealing cracks in concrete.

Injection Gel
INJECTION GEL is a 100% solids, USDA acceptable, adhesive epoxy gel, for filling cracks in concrete and wood members. INJECTION GEL will displace water in cracks and restore the concrete member to its original monolithic integrity.

Ultra Low Viscosity Structural Injection Resin
ULTRA LOW VISCOSITY STRUCTURAL INJECTION RESIN, Is a 100% solids, moisture insensitive, structural resin that will penetrates cracks down to 2 mills wide Under minimal pressure (60-80 psi)

Concrete Primer
CONCRETE PRIMER is a 100% solids resin, designed to bond old concrete to freshly poured concrete. CONCRETE PRIMER has excellent adhesion to damp concrete.

Tile Primer
TILE PRIMER is a 100% solids resin , designed to enhance the bond of epoxy flooring systems to concrete (wet or dry), wood, tile and steel. TILE PRIMER has an unique balance of high tensile elongation coupled with outstanding tear resistance.

Coal Tar Epoxy
COAL TAR EPOXY is a 100% solids, Modified coal tar novolac floor coating designed to bond to asphalt and concrete surfaces. High strength and resistant to most corrosive reagents. COAL TAR EPOXY will bond to cold damp substrates.

Underlayment Resin
Eastern Resins Underlayment Resin is a 100% solids, low viscosity epoxy system.
Suitable for use where a durable abrasion resistant surface is required. Underlayment Resin has been designed as a binder for sand mortar mixes to level uneven floors and as an inexpensive base coat broadcast overlay.

Troweling Aid
Troweling Aid is a 100% solids, non-hazardous non-evaporating, alcohol base, designed for aiding in troweling epoxy mortars that are difficult to work with. Troweling Aid allows the finisher to achieve a smooth finish even on the stickiest epoxy mortar systems. Troweling Aid will remove excess epoxy from tools and other equipment as long as the epoxy has not cured.

ER-1100
ER-1100 is a 100% solids, high build epoxy coating system designed for coating concrete surfaces subjected to constant immersion in water. ER-1100 will bond to water saturated ,surface dry concrete (SSD), and is resistant to sewer gasses, sulfur based chemicals, dilute acids and most caustics.

ER-2100
ER-2100 is a 100% solids, high performance novolac epoxy coating, featuring 30% tensile elongation, Superior chemical and abrasion resistance, high build tile like glaze finish will withstand severe abuse. Kevlar reinforcing fiber provides unsurpassed abrasion and chip resistance. ER-2100 HD can be applied to surfaces above and below the water line, bonds to concrete (wet & dry), steel and wood surfaces.

Silane 244
Silane 244 is a 97% solids, water repellent sealer for concrete, brick, block and other masonry surfaces. Silane 244 will deeply penetrate the surface and provide water repellency by chemically reacting with the cementitious substrate. Unlike traditional silane water repellents, Silane 244 performs equally well on old or new concrete and masonry surfaces. Silane 244 is not sensitive UV and weather deterioration. Treated surfaces are hydrophobic and retain their original appearance.

Water Seal 20
Water Seal 20 is a VOC compliant 20% solids, water repellent sealer for concrete, brick, block and other masonry surfaces. Water Seal 20 will deeply penetrate the surface and provide water repellency by chemically reacting with the cementitious substrate. Unlike traditional silane water repellents, Water Seal 20 performs equally well on old or new concrete and masonry surfaces. Water Seal 20 is not sensitive UV and weather deterioration. Treated surfaces are hydrophobic and retain their original appearance.

Acryl-Stat
ACRYL-STAT is a highly advanced one component acrylic Copolymer that incorporates the most consistent and reliable static control properties from the molecular level. Unlike other ESD coatings, ACRYL-STAT does not depend upon Indium tin oxide or other metallic particles that must be uniformly suspended in the coating in order to achieve proper static control. ACRYL-STAT stands up to constant traffic and will not break your budget, in fact its only a fraction of the cost of other "static dissipative" coatings and will give you the peace of mind knowing that it never takes a day off.

Epoxy Floor Maintainer
Epoxy Floor Maintainer is an highly advanced acrylic co-polymer floor finish, specifically designed to protect and enhance the life and appearance of epoxy floors. Epoxy Floor Maintainer will withstand constant traffic and increase the life expectancy of the epoxy floor before re-coating is required.